TETRA Terminals MR5.13 Software Release

Introduction
The Global TETRA Terminal team is please to announce the ship acceptance of MR5.13 Software Release.
MR5.13 is the latest software release for Tetra Terminals MTM800, MTM800E, MTH800, MTP850, MTP850 3L, MTP850S, MTP850FuG, MTP850Ex, MTP810Ex, MTP830FuG, MTP830S, CEP400, TCR1000 and MTP830, it replaces the MR5.12 series of releases.
MTM800 is limited to the addition of improvements including Next Generation CPS Plus support.
Next Generation CPS Plus also supports the TOM100, TCR100, MTM5400 and MTM800FuG products that have no radio software updates in this release.

New features in MR5.13:
• Control of Preferred Cell sites via Cell Retention Offset
• Ignore Specified Local Site Trunking notifications.
• Dialling Specific Number String Triggers an Emergency Call
• Control of 100 Talkgroups directly from TCR1000 RCU.
• Switch to pre-defined talkgroup via single press of One Touch Button.
• 5 Additional AT Command functions added to SDS Remote Control.
• Polish Language.
• C-C400 Accessory Emergency Button and PTT Support added.
• Heavy Duty Headset Accessory Support added.
• Next Generation CPS Plus with 12+ new features.
• Audio Profile update
• SDS Send to Group by Store and Forward.

The following features have been released previously on selected Terminals and are now made available on others.
• DMO Repeater
• User Interface improvements.
• Font Sizing
• Safety improvements
• Automatic power on.
• Overrule GPS off setting.
• Emergency Timer Call Delay
• Keypad lock.
• GPS Reporting on demand via OTB
• Duration of welcome screen
• Reset radio to pre-defined values via MMI.
• SDS Remote Control.
• Enhanced Language support.
• Car integration AT Commands
• C-C500 Accessory RSM Support added.
• Group SDS to external logger.
• Simplified controls
• Man down detector
• 1.8W extended operating range
• Specialist accessories
• Rugged IP55

Software Enablement Kit.
Orderable features remain available via an appropriate software enablement kit which consists of two dongles GM0193A (for Spypod only) and GM0127A for all other terminals, with the appropriate number of purchased licenses for one or more features. Each license activates only ONE matching feature per bodyworn radio unit at the same time as it is provisioned.

The new orderable features are:
• QA02766AA - - Enable Preferred Cell Stickiness
• QA02765AA - - Enable Ignore Local Site Trunking
These are in addition to the existing orderable features:
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable Multislot Packet Data
• QA00771AA - - Enable Enhanced Security Feature
• QA00772AA - - Enable Permanent Disable Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUA/RUI Feature
• QA01261AA - - Enable SCCH Feature
• QA01003AA - - Permanent Disable V2 Kill/Unkill
• QA01275AA - - Enable Dual Control Head
• QA01276AA - - Enable AIM Feature
• QA01403AA - - Toggle RF Power Class
• QA00993AA - - Enable Mandown Feature
• QA01628AA - - Enable RMS/FMS
• QA01629AA - - Enable SDS Remote Control
• QA01652AA - - Enable Cell Select By Talkgroup
• QA01746AA - - Enable WAP Push
• QA01847AA - - Enable Short Data Service over End to End Encryption
• QA01848AA - - Enable Immediate Text Message.
• QA01963AA - - Enable Repeater Feature
• QA01397AA - - Colour Display

MR5.12 and MR5.12R Software Releases

MR5.12 Firmware Versions
--------------------------------
380MHz: MTP850 MTP830 CEP400: R13.XX0.7412

800MHz: MTP850 MTP830 CEP400: R10.XX0.7412

380MHz: MTP850Ex MTP810Ex: R15.XX0.7412

800MHz: MTP850Ex MTP810Ex: R26.XX0.7412

MTH800: R07.XX0.7412

MTM800E: R14.000.7412 R17.XX0.7412

MTM800: R08.XX0.7412


MR5.12R Firmware Version
--------------------------------
380MHz: MTP850S MTP850FuG: R13.XX0.7491

UCM: R02.12.09

CPS: R6x.639.03 or R6x.652.01


Codeplug Versions
----------------------
70.84: MTP850 MTP830 CEP400 MTP850S MTP850FuG MTP850Ex MTP810Ex

MTP8503L MTH800

73.14: MTM800E

69.48: NGCH

72.99: MTM800

TETRA Terminals MR5.12 Software Release (CPS R6C.639.03)

Introduction
The Global TETRA Terminal team is please to announce the ship
acceptance of MR5.12 Software Release.
MR5.12 is the latest software release for Tetra Terminals MTM800,
MTM800E, MTH800, MTP850, MTP850 3L, MTP850S, MTP850FuG,
MTP850Ex, MTP810Ex, CEP400 and MTP830, it replaces MR5.11, MR5.11.1
and MR5.11.3 shipping from the factory and MR5.11.2 provided for field
upgrade.

New features in MR5.12
• Short Data Service over End to End Encryption (SDS over E2EE)
Note: SDS over E2EE is only supported on the MACE UCM with
newly released software version R02.12.07 or above.
It is not for BSI ‘SIM’ based encryption
• Location Information Protocol Temporary Reporting Control of
GPS. Also known as ‘LIP Throttling’
• User Selectable Functions for Rotary Knob Mode
• Immediate Text Messaging to Terminal
• Roaming Control
• Never go to a Local Site Trunking site
• Soft Alpha Numeric Keypad on Limited Keypad Terminals
• Louder and Adjustable Emergency Tone in Earpiece
• TMO and DMO Configurable Power Setting for Handportables
with 1.8W enabled.
• CPS Upgrade/downgrade
• CESG Approval
• Updates required to address hardware component obsolescence.

Features from previous releases that are now available on additional Terminals.
The following features have been released previously on selected
Terminals and are now made available on others.
• Return to WAP Screen if WAP session is Interrupted
• Audio Performance Improvements with Extra Loud RSM
• Chinese Alphabetic sort and searching by Pinyin (simplified
Chinese) or BoPoMoFo (traditional Chinese) or Stroke
• Automatic Appending of Received Message to Outgoing Template
Short Data Service Message
• Loudspeaker Mute Selection – permanent or temporary
• Kill
• Call Out
• Secondary Control Channel
• Private Call/SDS via ESN/MS-ISDN
• Automatic Keylock
• SDS Outbox
• PTT Double-Push
• Stopping Alert Tone & Pausing Alert Tone upon PTT is possible
[Call Out Alert Tone Changes]
• iTM Improvements
• Mobility Improvements (SC-G, Mobility Logging)
• Signed USB drivers for CPS and iTM
• CPS Pre-defined Templates addressed with MS-ISDN
• SDS Remote Control
• Static IP in TMO (via cps) Ipv4
• Manufacture, Type and Ser No in Service Mode
• Call History List (add time)
• CPS Programming time improvements
• Addition of French into Euro Pack 1 Language pack.

Software Enablement Kit
Orderable features remain available via an appropriate software
enablement kit which consists of a dongle GM0193A with the appropriate
number of purchased licenses for one or more features. Each license
activates only ONE matching feature per bodyworn radio unit at the same
time as it is provisioned.
The new orderable features are:
• QA01847AA - - Enable Short Data Service over End to End
Encryption ( note: only applicable to hardware E2EE module
equipped Terminals)
• QA01848AA - - Enable Immediate Text Message.
These are in addition to the existing orderable features:
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable Multislot Packet Data
• QA00771AA - - Enable Enhanced Security Feature
• QA00772AA - - Enable Permanent Disable Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUA/RUI Feature
• QA01261AA - - Enable SCCH Feature
• QA01003AA - - Permanent Disable V2 Kill/Unkill
• QA01275AA - - Enable Dual Control Head
• QA01276AA - - Enable Aim Feature
• QA01403AA - - Toggle RF Power Class
• QA00993AA - - Enable Mandown Feature
• QA01628AA - - Enable RMS/FMS
• QA01629AA - - Enable SDS Remote Control
• QA01652AA - - Enable Cell Select By Talkgroup
• QA01746AA - - Enable WAP Push

TCR1000 Covert TETRA Terminal MR9.11 Software Release

Introduction
The Global TETRA Terminal team is pleased to announce the ship acceptance of MR9.11 Software Release.

MR9.11 is the fifth software release for this radio and, for radios equipped with UCM-M (Universal Crypto Module – MACE. Motorola’s hardware based end to end encryption module), it replaces MR9.6, MR9.6.1, MR9.6.2 and MR9.6.3 shipping from the factory with TETRA Covert Radio TCR1000.

The CPS made available with this release includes an updated EUR1 Language pack bundling control enabling English plus German, Dutch, Swedish, Norwegian, Danish and now French to be installed together. This is only for Terminals with a display (i.e. not TCR1000)

New and updated Transceiver Tanapas
MR9.11 introduces the following radio tanapas with new encryption options.
PMUE3641A TCR1000 380-430 UCM-M AES256
PMUE3640A TCR1000 380-430 UCM-M TEA1 AES256
PMUE3644A TCR1000 380-430 UCM-M TEA2 AES256
PMUE3643A TCR1000 380-430 UCM-M TEA3 AES256
PMUE3642A TCR1000 380-430 TEA2 BSI E2EE

Note: These will be orderable by selecting one of the following options
QA01785AA TCR1000 380-430 UCM-M AES256
QA01786AA TCR1000 380-430 UCM-M TEA1 AES256
QA01787AA TCR1000 380-430 UCM-M TEA2 AES256
QA01788AA TCR1000 380-430 UCM-M TEA3 AES256

The following option is not yet orderable from the distribution centres.
QA01789AA TCR1000 380-430 TEA2 BSI E2EE
Customers requiring this tanapa should order option
TCR1000 380-430 TEA2 QA00799AA and through arrangement with Motorola service centre GMVN5612B MR5.11.3 CPS+TEA2 +BSI E2EE upgrade should be installed.

MR9.11 software is also applicable for the following radio tanapas which now include battery charging improvements compared to the previous ‘PMUExxxxA’ version, and their predecessors. Note - the orderable options have not changed.

PMUE2955B TCR1000 380-430 CLEAR
PMUE3149B TCR1000 380-430 UCM-M AES128
PMUE3151B TCR1000 380-430 TEA1
PMUE3154B TCR1000 380-430 TEA2
PMUE3152B TCR1000 380-430 TEA3
PMUE3153B TCR1000 380-430 UCM-M TEA1 AES128
PMUE3155B TCR1000 380-430 UCM-M TEA2 AES128
PMUE3157B TCR1000 380-430 UCM-M TEA3 AES128

This release also introduces the AES256 upgrade kit into the TCR1000 portfolio:
GMLN5038A MTP850/MTH800 UCM-M AES256 UPGD KIT

Distribution
The distribution centres will ship software (including this MR9.11 software) under the label 5.11.3 only with all TCR1000. MR9.11 software is distributed free of charge when ordered as part of a body-worn covert radio system

The version of Customer Programming Software (CPS) shipped under the label MR5.11.3 onwards is required for upgrading TCR1000 to MR9.11. This CPS is shared with other terminals. Codeplug configuration can be performed with earlier versions of CPS back to MR5.8

Note that the software tool called ‘CPS-Lite’ is not changed. CPS-Lite is a talkgroup manager hosted on a TETRA PDA; it enables the user to select the talkgroups that can be accessed by the talkgroup rotary switch on the RCU from those already programmed into the radio unit.

Software Enablement Kit
Orderable features remain available via an appropriate software enablement kit which consists of a dongle GM0193A with the appropriate number of purchased licenses for one or more features. Each license activates only ONE matching feature per bodyworn radio unit at the same time as it is provisioned.

The new orderable features are:
• QA01652AA - - Enable Cell Selection by Talkgroup
• QA01276AA - - Enable Air Interface Migration Feature.

These are in addition to the existing orderable features:
• QA00177AA - - Enable GPS Feature
• QA00771AA - - Enable Enhanced Security package.
• QA00772AA - - Enable Permanent Disable (KILL) Feature

Radio Firmware
The following encryption variants are released:

• R16.100.6068 (Clear with End-To-End on MACE UCM)
• R16.110.6068 (TEA1 with End-To-End on MACE UCM)
• R16.120.6068 (TEA2 with End-To-End on MACE UCM)
• R16.220.6068 (TEA2 with End-To-End on BSI SIM)
• R16.130.6068 (TEA3 with End-To-End on MACE UCM)

MR9.11 CPS
MR5.8 CPS onwards contains the CPS for TETRA Covert bodyworn radios and is also applicable for many other Tetra subscribers. The current CPS is version MR5.11.3 / MR9.11 as it applicable to both software releases.

The CPS version is R6C.623.01 and it the fifth CPS version for TCR1000.

The new CPS CD may be ordered:
GMVN5606C MR5.11.3 CPS Tetra Subscribers

TETRA Terminals MR5.11.1 Software Release

Introduction
The Global TETRA Terminal team is pleased to announce the shipment of the MR5.11.1 Software Release.
MR5.11.1 is the latest Software for the TETRA terminals MTH800, MTM800, MTM800E, CPE400/MTP830, MTP850 and MTP850 Class 3L. The software will be shipping from the factory with these terminals.

MR5.11.1 is a significant release that further enhances the terminal featureset and provides support for hardware updates (summary of the scope of the release can be found below).

MR5.11.1 also has characteristics of a Service Enhancement Release (SER) as it introduces solutions for several customer specific requirements.

MR5.11.1 continues the software version selection provided with the TETRA terminals. The release note details the upgrade compatibility.

A new version of Customer Programming Software (CPS) is required to be able to upgrade and program existing TETRA Terminals, refer to the relevant section below for ordering details.

MR5.11.1 Release Headlines
Support for Hebrew language:
• Hebrew language throughout the MMI
• Text input with TAP and iTAP
• Hebrew keypad
• Documentation via the Quick Start Guide

The new language pack will contain:
• English
• Hebrew
Note: The WAP browser does not support Hebrew. English language will be used, when Hebrew is selected as MMI language.

Importing audio templates through CPS
• A mechanism was introduced, which allows for Motorola to define
audio template files, which can be imported and used by
customers.

Improved MS Attachment To Scanned Talkgroup:
• The radio handles temporary detachment of groups for always
scanned groups as specified in ETSI standards

EOL:
• Supports up revisions of hardware.
• Only selected downgrade is supported (See release note).
Customer specific fixes:
• Call out alert tones
• Status message improvements


Software Enablement Kit
Software enablement kits are the preferred mechanism to provide Customers with desired additional features, these product enhancements are further enhanced in MR5.11.1 When purchasing the software features (e.g. GPS) the customer receives an enablement kit consisting of a dongle that will activate the features at the same time as the TETRA terminal is provisioned.

The orderable features in MR5.11.1 are:
• QA01275AA - - Dual Control Head (DCH)
• QA01261AA - - Secondary Control Channel (SCCH)
• QA01276AA - - Air Interface Migration (AIM)
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable MSPD Feature
• QA00771AA - - Enable Enhanced Security package.
• QA00772AA - - Enable Permanent Disable (KILL) Feature
• QA01003AA - - Kill/Unkill (Permanent Disable v2) Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUI/RUA Feature
• QA00993AA - - Enable MANDOWN Feature
• QA01628AA - - Enable RMS/FMS
• QA01629AA - - Enable SDS Remote Control
• QA01652AA - - Enable Cell Select by Talkgrp
• QA01746AA - - Enable WAP PUSH


MR5.11 CPS
MR5.11 CPS is now available. MR5.11 CPS version is R6C.604.01 and it
replaces the previously issued CPS versions.

With new terminals the new CPS CD shall be ordered:
• GMVN5606A - MR5.11 CPS (for programming only)

This CPS is compatible with TETRA terminals:
MTP850
MTP850 Class 3L
MTP850 FUG
MTP850 S
MTH800
MTM800
MTM800E
MTP810 EX
MTP850 EX
TOM100
MTC100
TCR1000

TETRA Terminals MR5.11 Software Release

Introduction:
The Global TETRA Terminal team is pleased to announce the shipment of the MR5.11 Software Release. MR5.11 is the latest Software for the TETRA terminals MTH800, MTM800, MTM800E, MTP850, MTP850 Class 3L, MTP810Ex and MTP850Ex. The software is now shipping from the factory with these terminals.

MR5.11 is a significant release that further enhances the terminal featureset and provides support for both versions of the End to End (E2E) Universal Crypto Module(UCM), (full details of the scope of the release can be found below).

MR5.11 also has characteristics of a Service Enhancement Release (SER) as it introduces solutions for several customer specific requirements.

MR5.11 continues the software version selection provided with the TETRA terminals. The distribution centres will ship the software of your choice. The release Note details the Upgrade compatibility.

A new version of Customer Programming Software (CPS) is required to be able to upgrade and program existing TETRA Terminals, refer to the relevant section below for ordering details.


MR5.11 Release notes:
Release notes can be found at motorola.
Please read the MR5.11 Release Notes before installing the new CPS and upgrade the radios.
MR5.11 release note provides the description for all new features, operation notes and limitations.
Also the release note lists all the customer required enhancements provided with this software release.

MR5.11 Release Headlines:
CPS Pre-defined Templates addressed with MSISDN:
• The users can choose between MS-ISDN and ISSI when addressing calls to another TETRA radio.
• With MS-ISDN calls, two MS can have calls based on assigned ISDN number.

Static IP in TMO:
• Data applications in the infrastructure may require fixed IPs
• Possible easier DNS lookup
• Enhanced Control of IPs
• Useful if more services are used
• Possible used for filtered access

Manufacturer, Type and Serial Number in Service Mode:
• Easy access to service information

WAP Push:
Pushes content to the radio users. Examples,
• Reports and notifications
• Alarms
• Announcements
• Distributions

RMS/FMS:
• Allows mutual exchange of certain alphanumeric codes between the radio users and their control rooms.

E2EE Packet Data:
• Offers customers to use E2EE packet data to secure the data communication.

SDS Remote Control:
The feature enables to remotely make the following changes in the MS.
• Switch from DMO to TMO or TMO to DMO
• Change Talkgroup in any mode (TMO or DMO)

Call History List:
• The feature enables the MS to store recent dialled, received and missed calls for future use.


MACE UCM SPU with AES256:
A Service Pack update for MACE UCMs using the AES256 algorithm is included in MR5.11. UCMs with the AES256 algorithm that were shipped prior to this release have an incorrect value for OTAK algorithm identifier (called KMMID).

This value was also incorrect in Motorola infrastructure products. Since they both match, customers using all Motorola equipment do not experience any issues.

The infrastructure devices were updated as part of the Dimetra 7.0 system release which was M2 SA the 24th Nov 2010.


Software Enablement Kit:
Software enablement kits are the preferred mechanism to provide Customers with desired additional features, these product enhancements are further enhanced in MR5.11. When purchasing the software features (eg GPS), the customer receives an enablement kit consisting of a dongle that will activate the features at the same time as the TETRA terminal is provisioned.

The orderable features in MR5.11 are:
• QA01275AA - - Dual Control Head (DCH)
• QA01261AA - - Secondary Control Channel (SCCH)
• QA01276AA - - Air Interface Migration (AIM)
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable MSPD Feature
• QA00771AA - - Enable Enhanced Security package.
• QA00772AA - - Enable Permanent Disable (KILL) Feature
• QA01003AA - - Kill/Unkill (Permanent Disable v2) Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUI/RUA Feature
• QA00993AA - - Enable MANDOWN Feature
• QA01628AA - - Enable RMS/FMS
• QA01629AA - - Enable SDS Remote Control
• QA01746AA - - Enable WAP PUSH

Tetra Software Release MR3.1.6E for MTM700 and MTP700

Introduction:
With the introduction of the MR3.1.6E Software Release for the MTM700 and MTP700 Tetra Terminals, Motorola continue to demonstrate it’s commitment to ensure that our Customers selection of Motorola Subscribers will meet their changing requirements.
MR3.1.6E is the final feature enhancement release for the MTM700 and MTP700 family of Tetra Terminals. The release includes a final package of software corrections to address a number of Customer requirements.

The release of MR3.1.6E brings to an end Motorola’s Service life Software support for the MTM700 and MTP700 (sic) family of products. Any future feature requirements or Customer enhancements will be served by the New generation of Tetra Subscriber Terminals. Release MR3.1.6E will be supported by a new Customer Programming Software (CPS).

There are no hardware changes required to support these new enhancements.

Scheduled Release Date : 01 December 2009

Release Notes:
The Software Release notes to support MR3.1.6E will be located with the CPS and the Radio Firmware available for download from Motorola on Line (MOL) or for Motorola authorised personnel from the General CPS Compass site.
The Release Notes will provide full details on the corrections implemented for Customer requirements.

Tetra MR5.10 Software Release CPS R6C.563.01

Introduction
The Global TETRA Terminal team is pleased to announce the shipment of
MR5.10 Software release. MR5.10 is the latest Software for the TETRA
terminals MTH800/MTM800/MTM800E/MTP850. The software is now
shipping from the factory with these terminals.

MR5.10 is a significant release that further enhances the terminal featureset and provides support for both versions of the End to End (E2E) Universal Crypto Module (UCM), (full details of the scope of the release can be found below).

MR5.10 also has characteristics of a Service Enhancement Release (SER) as it introduces solutions for several customer specific requirements.

MR5.10 continues the software version selection provided with the TETRA terminals. The distribution centres will ship the software of your choice.

MR5.10 software is distributed free of charge if ordered, previous releases are charged via the option selected. The release Note details the Upgrade compatibility.

A new version of Customer Programming Software (CPS) is required to be able to upgrade and program existing TETRA Terminals, refer to the relevant section below for ordering details.


Software Enablement Kit
Software enablement kits are the preferred mechanism to provide Customers with desired additional features, these product enhancements are further enhanced in MR5.10. When purchasing the software features(eg GPS), the customer receives an enablement kit consisting of a dongle that will activate the features at the same time as the TETRA terminal is provisioned.

The orderable features in MR5.10 are:
• QA01275AA - - Dual Control Head (DCH)
• QA01261AA - - Secondary Control Channel (SCCH)
• QA01276AA - - Air Interface Migration (AIM)
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable MSPD Feature
• QA00771AA - - Enable Enhanced Security package.
• QA00772AA - - Enable Permanent Disable (KILL) Feature
• QA01003AA - - Kill/Unkill (Permanent Disable v2) Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUI/RUA Feature


MR5.10 CPS
MR5.10 CPS is now available. MR5.10 CPS version is R6C.563.01 and it replaces the previously issued CPS versions.

With new terminals the new CPS CD shall be ordered:
• GMVN5539A - MR5.10 CPS (for programming only)

This CPS is compatible with TETRA terminals:
MTP850
MTH800
MTM800
MTM800E
MTP810 EX
MTP850 Ex – D2
TOM100
MTC100
TCR1000


Upgrade
For upgrading the z19 file should be present on the folder pointed by:
Options --> Directories --> Default Software Path. Due to export control considerations, only clear radios upgrade kits are placed in MOL.
For encrypted radios (TEA1, TEA2 or TEA3) the upgrade kit shall be ordered:
• GMVN5540A - MR5.10_CPS+CLR (w/ UPGRADE tool)
• GMVN5541A - MR5.10 CPS+TEA1 (w/ UPGRADE tool)*
• GMVN5542A - MR5.10 CPS+TEA2 (w/ UPGRADE tool)*
• GMVN5543A - MR5.10 CPS+TEA3 (w/ UPGRADE tool)*
• Encryption item (Encryption software is an Export Controlled item)

Tetra MR5.9.11 Software Release CPS R6C.563.01

Introduction
The Global TETRA Terminal team is pleased to announce the ship acceptance of the first TETRA Commercial & Enterprise Portable CEP400 380-430 MHz.

Product Concept
• ”Value for Money” TETRA portable for PRICE SENSITIVE markets.
• Complements Dimetra IP Compact and Dimetra IP Micro offers.
• Voice centric terminal with essential data services such as Short Data Services and Location Services. No encryption; nevertheless,authentication services supported.

Product Foundations
• Reliability & Robustness
• Audio Quality
• Easy of Use

Customer Profile
• Existing analogue trunking users with need to upgrade to digital.
• Limited budgets, moderate requirements.
• Commercial, manufacturing, transport, Utilities, Municipalities, etc.

Accessories
• Full range – All accessories of MTP850 can be used with CEP400.


IOP Certificates
In accordance with established rules for the submission of TETRA products for TETRA interoperability testing (IOP), Motorola only submits final, production ready / shipping products for formal IOP testing. As part of its commitment to its customers and to the TETRA Association IOP process, Motorola is committed to obtain formal IOP certification for this terminal on Motorola and other TETRA networks at the earliest possible opportunity.

Within the formal IOP process, Motorola will work with infrastructure vendors, ISCOM (the independent test authority) and the wider IOP community to agree the timing of future IOP sessions, and if necessary and in accordance with TETRA Association IOP procedures, make a formal request to manufacturers to host IOP sessions at the earliest possible opportunity.


Radio Firmware
CEP400 supports ONLY CLEAR firmware; neither Air Interface Encryption (TEA1, TEA2, and TEA3) nor End to End Encryption is supported.


Software Enablement Kit
Orderable features are available via an appropriate software enablement kit which consists of a dongle GM0127 with the appropriate number of purchased licenses for one or more features. Each license activates only ONE matching feature per portable at the same time as the TETRA portable is provisioned.

The list of orderable features is
QA00177 - ENABLE GPS FEATURE
QA01397AA – ENABLE COLOUR DISPLAY


Product Details
The MR5.9.11 software release can be installed ONLY on the new hardware for CEP400 380-430 MHz (see new sales model above).
This NEW terminal CEP400 is available ONLY with CLEAR firmware; no encryption is supported (neither Air Interface Encryption nor End to End Encryption).

Tetra MR5.9.1 Software Release CPS R6C.558.01

The MR5.9.1 software release can be installed in the following TETRA terminals:
• MTH800
• MTM800
• MTM800E
• MTP850

The MTH800 handportable terminal is available to work within the following frequencies:
• 380 - 430 MHz
• 450 – 470 MHz

The MTM800 mobile terminal is available to work within the following frequencies:
• 380 - 430 MHz
• 410 – 470 MHz
• 806 - 870 MHz

The MTP850 handportable terminal is available to work within the following frequencies:
• 380 - 430 MHz
• 806 - 870 MHz

The MTM800E mobile terminal is available to work within the following frequencies:
• 380 - 430 MHz
• 410 – 470 MHz
• 350 – 390 MHz
• 806 – 870 MHz

The MTH800, MTM800, MTM800E and MTP850 terminals is available with the following encryption possibilities:
• Clear (no air interface encryption) without End to End Encryption
• TETRA Encryption Algorithm 1 (TEA1) without End to End Encryption
• TETRA Encryption Algorithm 2 (TEA2) without End to End Encryption
• TETRA Encryption Algorithm 3 (TEA3) without End to End Encryption
• Clear (no air interface encryption) with End to End Encryption
• TETRA Encryption Algorithm 1 (TEA1) with End to End Encryption
• TETRA Encryption Algorithm 2 (TEA2) with End to End Encryption
• TETRA Encryption Algorithm 3 (TEA3) with End to End Encryption

With MR5.9.1 the following new data radio sales models were introduced
- M80RCA6TZ5AN
- M80UCA6TZ5AN
- M80NCA6TZ5AN
- M80PCA6TZ5AN
- MTM800 ENH 410-470 MHz, DATA MT912M
- MTM800 ENH 806-870 MHz, DATA MT512M
- MTM800 ENH 350-390 MHz, DATA MT712M
- MTM800 ENH 380-430 MHz, DATA MT812M

Tetra MR5.9.1 Software Release CPS R6C.550.04

Introduction
The Global TETRA Terminal team is pleased to announce the shipment of MR5.9.1 Software release. MR5.9.1 is the latest Software for the TETRA terminals MTH800/MTM 800/MTM800E/MTP850. The software is now shipping from the factory with these terminals.

MR5.9.1 adds improvements to MR5.9 which was significant release that further enhanced the terminal feature-set and provides support for both versions of the End to End (E2E) Universal Crypto Module (UCM), (full details of the scope of the release can be found below).

MR5.9.1 has the characteristics of a Service Enhancement Release (SER) as it introduces solutions for several customer specific requirements.

MR5.9.1 continues the software version selection provided with the TETRA terminals. The distribution centres will ship the software of your choice. MR5.9.1 software is distributed free of charge if ordered, previous releases are charged via the option selected. The release note details the Upgrade compatibility

A new version of Customer Programming Software (CPS) is required to be able to upgrade and program existing TETRA Terminals, refer to the relevant section below for ordering details.


Software Enablement Kit
Software enablement kits are the preferred mechanism to provide customers with desired additional features; these product enhancements are available with MR5.9.1. When purchasing the software features (eg GPS), the customer receives an enablement kit consisting of a dongle that will activate the features at the same time as the TETRA terminal is provisioned.

Three NEW Features were introduced in MR5.9 Release:-
• QA01275AA - - Dual Control Head (DCH)

These two orderable features, that were previously only available for specific customers, are now included in MR5.9 and are available to all customers :
• QA01261AA - - Secondary Control Channel (SCCH)
• QA01276AA - - Air Interface Migration (AIM)

The features above were added to the existing list of orderable features:
• QA00175AA - - Enable WAP Feature
• QA00177AA - - Enable GPS Feature
• QA00176AA - - Enable MSPD Feature
• QA00771AA - - Enable Enhanced Security package.
• QA00772AA - - Enable Permanent Disable (KILL) Feature
• QA01003AA - - Kill/Unkill (Permanent Disable v2) Feature
• QA01089AA - - Enable Call Out Feature
• QA01090AA - - Enable RUI/RUA Feature


Data Radios
MR5.9 introduced the following MTM800 Enhanced Data radio models.
• M80RCA6TZ5AN – MTM800 Enhanced 410-470 MHz Data
• M80UCA6TZ5AN – MTM800 Enhanced 806-870 MHz Data
• M80NCA6TZ5AN – MTM800 Enhanced 350-390 MHz Data
• M80PCA6TZ5AN – MTM800 Enhanced 380-430 MHz Data

The Data Radio feature allows the transceiver to work without a Next Generation Control Head in a special Data Box mode. In this mode the Data Box Radio is controlled via Peripheral Equipment Interface through AT commands or TNP1 commands from 3rd Party Control Terminals.


MR5.9.1 CPS
MR5.9.1 CPS is now available. MR5.9.1 CPS version is R6C.550.04 and it replaces the previously issued CPS versions.

This CPS is compatible with TETRA terminals:
MTP850
MTH800
MTM800
MTM800E
MTP810 EX
MTP850 Ex – D2
TOM100
MTC100
TCR1000

Tetra MR5.9.10 Software Release CPS R6C.550.01

Motorola's TETRA CPS. Read this file in its entirety for the
latest information regarding this release.
------------------------------------------------------------
This file has been divided into the following three sections
for easy reference:
1. RELEASE NOTES
2. KNOWN ISSUES
3. COPYRIGHT NOTICE


1. RELEASE NOTES
----------------
This release supports:

* MTM800, MTM800E, MTH800, MTP850, MTP850Ex
* Windows 2000, Win XP Professional;

2. KNOWN ISSUES
---------------
(1) The Traditional Chinese Help File don't show correctly

:
1) Go to "Start->Settings->Control Panel->Regional and Language Options".
2) Go to advance tab, set language to Chinese(Hong Kong S.A.R).
3) Click OK to restart windows, then CPS can correctly display Traditional Chinese help content.

(2) Virtual COM Ports are not supported.
(3) For multiple copy or multiple upgrade operations, the use of Belkin 4 way or 7 way(F5U238 or F5U028) hubs is recommended.
The maximum recommended number of units to be copied or upgraded at one time using a hub is 4.



3. COPYRIGHT NOTICE
-------------------

Windows 2000,Windows XP are registered
trademarks by Microsoft Corporation.

Portions of the TETRA CPS runtime libraries are provided
by the following companies:

Objective Grid and Objective Toolkit - Stingray Software;
WinRT - Blue Water Systems;
Microsoft ODBC - Microsoft Corporation;
Microsoft Foundation Classes - Microsoft Corporation.