FLASHport Troubleshooting Hints

Unable to create instance of Encaten Component:
This is an error with the file Encaten Component.dll. It is either not installed correctly or not registered. You may search for that file and if it is found then attempt to register the file (make sure CPS is closed before attempting this step) by going to Start->Run and typing in the following command: regsvr32 \Encaten- Component.dll
If that does not work, then try uninstaling and then reinstalling CPS.

Error extracting bootcode from upgrade file:
This is an error with the software upgrade kit. It is either corrupted or an error occurred while extracting the bootcode software. Verify that the correct software upgrade kit has been selected.

Error Opening Flash Upgrade File:
This is an error with the software upgrade kit. It is either corrupted or the application cannot locate the file.

Bootcode Not Present:
This is an error with the software upgrade kit. It is either corrupted or does not contain the required bootcode. Verify that correct software upgrade kit has been selected.

Error extracting radio application software from upgrade file:
This is an error with the software upgrade kit. It is either corrupted or error occurred while extracting the HOST software. Verify that the correct software upgrade kit has been selected.

Host Code Not Present:
This is an error with the software upgrade kit. It is either corrupted or does not contain the required HOST software. Verify that the correct software upgrade kit has been selected.

Error extracting DSP software from upgrade file:
This is an error with the software upgrade kit. It is either corrupted or error occurred while extracting the DSP software. Verify that the correct software upgrade kit has been selected.

Checksum Error in the Flash Upgrade File:
This is an error with the software upgrade kit. It is corrupted and does not contain a valid checksum.

DSP Code Not Present:
This is an error with the software upgrade kit. It is either corrupted or does not contain the required DSP code. Verify that correct software upgrade kit has been selected.

Error Opening Flash Upgrade File:
This is an error with the software upgrade kit. It is either corrupted or the application cannot locate it. Verify that the correct software upgrade kit has been selected and that the user has permissions to read the file.

There is a FLASH file and hardware mismatch:
This is an eror with the software upgrade kit. The file does not have the correct radio type for the radio being upgraded. Verify that the correct software upgrade kit has been selected.

Invalid Upgrade File Format:
This is an error with the software upgrade kit. It is either corrupted or the contents of it are incorrect. Verify that the correct software upgrade kit has been selected.

Error encountered while handling the Flash Upgrade File:
This error means that the application had problems extracting data from the software upgrade kit. Verify that the correct software upgrade kit has been selected.

Error encountered while validating Flash Upgrade File:
This error means that the application had problems validating the data in the software upgrade kit. Verify that the correct software upgrade kit has been selected.