==============================================
README FILE FOR 5T MOBILE UPGRADE KIT SOFTWARE
==============================================
Product : Professional GM300/GM340/GM339/GM360/GM380 series.
Release : R03.15.00
Date : 16 Dec 2010
Language : English
====================
Features For Release
====================
- Upgrade 5T Mobile Radio to software version R03.15.00 and to codeplug version R03.14.03.
- Compatible CPS version: R03.11.15
- Tuning data is saved and rewrite to radio during upgrade.
- Supported software versions (official):
R03.00.25, R03.00.26, R03.01.10, R03.01.17, R03.01.20, R03.01.22, R03.01.25, R03.01.27,
R03.01.31, R03.01.37, R03.02.00, R03.02.07, R03.02.09, R03.02.11, R03.02.13, R03.02.15,
R03.02.16, R03.02.17, R03.03.00, B03.03.02, B03.03.03, R03.04.00, R03.04.02, B03.04.03,
B03.04.05, R03.05.00, R03.06.00, R03.07.06, B03.08.04, R03.08.08, B03.08.10, B03.09.03,
R03.09.05, R03.10.03, R03.11.02, B03.12.00, R03.12.03, B03.12.04, R03.13.00, R03.14.00,
B03.15.00, R03.15.00
- Supported model number:
Model Number Tanapa Number Latest Version Description
------------------------------------------------------------------------------
EPP models
-------------------------------------------------------------------------------
M25CKF9AN5 IMUB6004C 08.00 GM360(GM339)pref lb2 epp
M25DKF9AN5 IMUB6005C 08.00 GM360(GM339)pref lb3 epp
M25KHA9AN0 IMUD6013B 08.00 GM300 databox vhf epp
M25KHC9AN1 IMUD6013B 08.00 GM340 plain vhf epp
M25KHF4AN5 IMUD6013B 08.00 GM360(GM339)pref vhf epp 12_5K
M25KHF9AN5 IMUD6013B 08.00 GM360(GM339)pref vhf epp
M25KHN9AN8 IMUD6024B 08.00 GM380(GM399)prime vhf epp
M25RHA9AN0 IMUE6015B 08.00 GM300 databox uhf epp
M25RHC9AN1 IMUE6015B 08.00 GM340 plain uhf epp
M25RHF4AN5 IMUE6015B 08.00 GM360(GM339)pref Uhf epp 12_5K
M25RHF9AN5 IMUE6015B 08.00 GM360(GM339)pref uhf epp
M25RHN9AN8 IMUE6038B 08.00 GM380(GM399)prime uhf epp
M25SHF4AN5 IMUE6016A 08.00 GM360(GM339)pref uhf2 12_5K
Non-EPP models
-------------------------------------------------------------------------------
M25BKF9AN5 IMUB6003A 08.00 GM360(GM339)pref lb1
M25CKF9AN5 IMUB6004A 08.00 GM360(GM339)pref lb2
M25DKF9AN5 IMUB6005A 08.00 GM360(GM339)pref lb3
M25KHA9AN0 IMUD6013A 08.00 GM300 databox vhf
M25KHC9AN1 IMUD6013A 08.00 GM340 plain vhf
M25KHF9AN5 IMUD6013A 08.00 GM360(GM339)pref vhf
M25KHN9AN8 IMUD6024A 08.00 GM380(GM399)prime vhf
M25RHA9AN0 IMUE6015A 08.00 GM300 databox uhf
M25RHC9AN1 IMUE6015A 08.00 GM340 plain uhf
M25RHF9AN5 IMUE6015A 08.00 GM360(GM339)pref uhf
M25RHN9AN8 IMUE6038A 08.00 GM380(GM399)prime uhf
M25SHF9AN5 IMUE6016A 08.00 GM360(GM339)pref uhf2
M25SHN9AN8 IMUE6042A 08.00 GM380(GM399)prime uhf2
===============================
WARNING FOR ALL RADIO TYPES !!!
===============================
1. PLEASE SAVE YOUR EXISTING CODEPLUG AS AN ARCHIVE FILE BEFORE UPGRADE:
The codeplug programming information may be lost after the upgrade process.
Therefore, it is recommended to read the radio using the CPS before upgrade,
and save an archive of the radio's codeplug before starting the upgrade process.
After upgrade, the archive file can be used to recover the codeplug programming
information by programming the archive back into the radio.
2. Ensure the upgrade process is not interrupted. Interruption will cause the
radio not to operate anymore and attempting to upgrade the radio again will NOT be
successful.
3. Do NOT create a shortcut of the program (e.g. on your desktop), the program might
not be able to find the data files in that case!
4. Do not remove the programming cable or turn off the radio while upgrade is in
progress.
5. In case of failure during upgrade, a message box will appear to guide the user
to recover from the failure, if possible.
6. The flashing rate can only be changed by restarting the program.
7. Do not run more than one copy of the program at the same time.
8. Baud rate 115k can only be supported by certain Radio Interface Boxes (RIB).
Use 19k baud rate when using a RIB. RKN4075A RIBless cable supports 115k baud.
======================================
HOW TO INSTALL AND RUN THIS SOFTWARE
======================================
Installation of the software can be completed by double clicking the setup
file "UpgradeKit_5T_Mobile-R03.15.00.exe",and can be started through
Programs Menu.
Do NOT create a shortcut of the program e.g. on your desktop, the program
might not be able to find the data files in that case !
For the usage of this software the following radio accessories are required:
(A) Flashing mobiles via the rear connector:
- Flash adapter, P/N HLN9742A or B
and (i)
- Radio Interface Box, P/N RLN4008
with battery or power supply
- RIB to PC cable, P/N 3080369B72 (9pin) or 3080369B71 (25pin)
- Programming/test cable, P/N RKN4083
or (ii)
- RIBless programming cable, P/N RKN4081
- 10 pin (Mic) to 20 pin (rear) adapter RLN4853
By using equipment (i) the Flash adapter has to be connected between the
Radio Interface Box and the Programming/test cable. Maximum baud rate for
this equipment is 19,200 Bd.
By using equipment (ii) the Flash adapter has to be connected between the
PC and the RIBless programming cable.
For Flash Adapter HLN9742A, "Flash mode on" means switch position "ON".
For Flash Adapter HLN9742B, "Flash mode on" means switch position "A",
position "B" is used for mic connector flashing.
It is not possible to use Programming cable GTF374 for upgrading radios.
or
(B) Flashing mobiles via the mic connector:
- RIBless programming cable, P/N RKN4081B
- Flash adapter, P/N HLN9742B
"Flash mode on" means flash adapter switch position "B",position "A" is
used for rear connector flashing.
RIBless programming cable, P/N RKN4081A cannot be used for mic Connector
flashing.
It is not possible to use Programming cable GTF374 for upgrading radios.
=======================================
INSTRUCTIONS ABOUT UPGRADING PROCESS
=======================================
The following instructions detail the operations of the Upgrade Kit,
these instructions must be followed in the exact order:
1.Read through the README file and make sure your radio meets the updating
specifications. The README file can be found by going through Start Menu >>
Programs >> Professional Radio Upgrade Kit >> Upgrade Kit R03.15.00 with CP R03.14.03 for 5T Mobile Radios
>> README
2.Start the Upgrade Kit by going to Start menu >> Programs >> Professional
Radio Upgrade Kit >> Upgrade Kit R03.15.00 with CP R03.14.03 for 5T Mobile Radios >>
Upgrade Kit R03.15.00 with CP R03.14.03.
3.Connect a fully charged battery or a power supply to a radio and turn the radio
on. Ensure that the radio has powered up properly.
4.Attach the programming cable to the radio. Connect the other end of the
programming cable to the computer or Radio Interface Box (RIB) through the
flashing adapter (HLN9742B). Ensure that the flashing adapter is set to "OFF"
position.
5.After the Upgrade Kit is launched and the upgrade screen appears, click on the
"PROGRAM" button and follow the instructions.
6.Only on the first attempt of upgrade, the flash baud rate configuration
dialog box will appear. The default baud rate is 19,200. Select 'OK' if
you want to use the default value or you can select a different baud rate
and then click the 'OK' button.
7.Follow the instructions prompted to set the flash adapter to 'ON' position.
8.Remove the power from the radio and then reconnect the power.
#Note:
THE RADIO'S DISPLAY WILL BE BLANK AND THE RADIO WILL APPEAR TO BE NOT FUNCTIONAL
EVEN THOUGH THE "ON/OFF" KNOB IS IN "ON" POSITION. THIS IS A CORRECT BEHAVIOR !!!
THE RADIO IS ACTUALLY IN BOOTSTRAP MODE WHICH IS REQUIRED FOR FLASHING!
9. Click the "OK" button to continue with the updating process.
10.The status bar will indicate the percentage of completion.
11.Once flashing is completed, remove the programming cable and set the flash adapter
to "OFF" position.
(This is very important, even if you are going to update another radio).
12.To update another radio, attach the programming cable, and go to step 3.
================
TROUBLESHOOTING
================
1. If the Upgrade Kit cannot be started:
A. Make sure it is the original version of the kit and not copied off another
computer.
B. Make sure another copy is not running on your computer.
2. If an error is returned when you select program, check the following:
A. On RIB setting menu, set 'Echo' for single-wired bootstrap. 'No Echo' is for
dual-wired bootstrap. Professional radios use single-wired bootstrap.
B. On the Comm setting menu, make sure the port selected is the one which the
radio is connected.
C. Make sure the radio is on and properly connected to the computer.
3. If an error is returned immediately after the radio go into bootstrap mode:
A. Click 'OK' and switch the flash adapter to 'CPS' or 'NORMAL' or 'OFF'
position, turn the radio off then on, and try again.
==============================
RADIO SOFTWARE RELEASE NOTE
==============================
Release 5t-Mobile -R03.15.00
Previous Release 5t-Mobile -R03.14.00
Motorola Tetra Radio, MotoTRBO Radio, Commercial Series Radio, Astro 25 Radio, Professional Radio, Trunking Radio, MPT Radio, Alpha Radio, Select-5 Radio, Kenwood Radio, Yaesu Radio, Icom Radio, Vertex Radio, Alinco Radio, etc....